Black plate (269,1)
Model "S51-D" EDITED: 2008/ 3/ 26
call back number does not exist, th e
system announces, “There is no number
to call back”and ends the VR session.
International
When you would like to enter a phone
number other than in 3-3-4 digit format,
say “international”. When the system
acknowledges this command, the system
will prompt you to speak the number you
wish to enter.
During a call
During a call there are several command
optionsavailable. Press the buttonon
the steering wheel to mute the receiving
voice and enter commands.
.“Help”—The system announces the
available commands.
.“Go back/Correction”—The system
announces “Go back,”ends the VR
session and returns to the call.
.“Cancel/Quit”—The system an-
nounces“Cancel,”ends the VR session
and returns to the call.
.“Send/Enter/Call/Dial”—Usethe Send
command to enter numbers during a
call. For example, if you were directed
to dial an extension by an automated
system:
Say: “Send one two three four.”
The system acknowledges the com-
mand and sends the tones associated
with the numbers. The system then
ends the VR session and returns to the
call.
.“Transfer Call”—Use the TransferCall
command to transfer the call from the
Bluetooth
®
Hands-Free Phone System
to the cellular phone when privacy is
desired.
The system announces, “Transfer call.
Call transferred to privacy mode.”The
system then ends the VR session.
You can also issue the Transfer Call
command again to return to a hands-
free call through the vehicle.
.“Mute”—Use the Mute command to
mute your voice so the other party
cannot hear it. Use the mute command
again to unmute your voice.
NOTE:
If the other party ends the call or the
cellular phone network connection is lost
while the Mute feature is on, the Mute
feature may need to be reset to “off.”
SAA1928
PHONE BOOK
ThePhone Book stores up to 40 names for
each phone paired with the system. Each
name can have up to 4 locations/phone
numbers associated with it.
NOTE:
Each phone has its own separate phone
book.You cannot access Phone A’s phone
book if you are currently connected with
Phone B.
“New Entry”
Usethe New Entry command to store a new
name in the system.
Monitor, climate,audio, phoneand voicerecognition systems 4-103