Infiniti S51-D owner manual Windshield Wiper and Washer Operation

SIC3626

WINDSHIELD WIPER AND WASHER OPERATION

The windshield wiper and washer operates when the ignition switch is in the ON position.

Push the lever down to operate the wiper at the following speed:

*1 Intermittent — intermittent operation can be adjusted by turning the knob toward *A (Slower) or *B (Faster).

When the speed sensing wiper interval function (if so equipped) is turned on, the intermittent operation speed varies in accordance with the vehicle speed.

2-34Instruments and controls

(For example, when the vehicle speed is high, the intermittent operation speed will be faster.) To turn this function on and off, see “HOW TO USE SETTING BUTTON” in the “4. Monitor, climate, audio, phone and voice recognition systems” section.

For models with the rain-sensing auto wiper system, see “RAIN-SENSING AUTO WIPER SYSTEM” later in this section.

*2 Low — continuous low speed operation

*3 High — continuous high speed opera- tion

Push the lever up *4 to have one sweep operation of the wiper.

Pull the lever toward you *5 to operate the washer. Then the wiper will also operate several times.

SIC3847

RAIN-SENSING AUTO WIPER SYS- TEM (if so equipped)

The rain-sensing auto wiper system can automatically turn on the wipers and adjust the wiper speed depending on the rainfall and the vehicle speed by using the rain sensor located on the upper part of the windshield.

To set the rain-sensing auto wiper system, push the lever down to the INT (intermit- tent) position *1 . The wiper will sweep once while the ignition switch is in the ON position.

The rain sensor sensitivity level can be adjusted by turning the knob toward the