Onkyo TX-SA705 Advanced Setup—Continued, Audio Adjust Functions, Tone Control Settings

Advanced Setup—Continued

Audio Adjust Functions

Here you can set listening mode-related settings and functions.

1Press the [RECEIVER] button fol- lowed by the [SETUP] button.

The main menu appears onscreen.

5When you’ve finished, press the [SETUP] button.

The setup menu closes.

Note:

This procedure can also be performed on the AV receiver/AV amplifier by using its [SETUP] button, arrow buttons, and [ENTER] button.

The Audio Adjust functions are explained below.

Tone Control Settings

2

ENTER

ENTER

Use the Up and Down []/[ ] buttons to select “3. Audio Adjust,” and then press [ENTER].

The Audio Adjust menu appears.

3.Audio Adjust

1.Tone Control

2.Multiplex/Mono

3.PLIIx/Neo:6

4.Dolby EX

5.Theater-Dimensional

6.LFE Level

You can adjust the bass and treble for the front speakers, except when the Direct, Pure Audio or THX listening mode is selected.

■Bass

You can boost or cut low-frequency sounds output by the front speakers from –10 dB to +10 dB in 2 dB steps.

■Treble

You can boost or cut high-frequency sounds output by the front speakers from –10 dB to +10 dB in 2 dB steps.

Multiplex/Mono Settings

3 Use the Up and Down []/[ ]

■Multiplex Input Ch

ENTER

ENTER

buttons to select the functions, and then press [ENTER].

The function menu you selected appears.

This setting determines which channel is output from a stereo multiplex source. Use it to select audio channels or languages with multiplex sources, multilingual TV broadcasts, and so on.

Main: The main channel is output (default). Sub: The sub channel is output.

Main/Sub: Both the main and sub channels are output.

■ Mono Input Ch

4	Use the Up and Down [ ]/[	]
	buttons to select the settings,
	and use the Left and Right [	]/
ENTER	[ ] buttons to set them.
	The settings are explained below.

ENTER

This setting specifies the channel to be used for playing any 2-channel digital source such as Dolby Digital, or 2- channel analog/PCM source in the Mono listening mode.

L+R: Both the left and right channels are output (default).

L: Only the left channel is output.

R: Only the right channel is output.

■ Output Speaker

This setting determines which speakers output mono audio when the Mono listening mode is selected.

L/R: Mono audio is output by the front left and right speakers.

C:Mono audio is output by the center speaker (default).

85