Joystick Tension Adjustment
The speed control joystick uses friction adjustment to provide the preferred
“feel”:
1.Using a ¼” Allen wrench and 9/16” wrench, loosen both pivot bolts until they can be turned by hand. Pivot #1 only requires a 9/16” wrench, as the Allen nut side is welded in place.
2.Tighten pivot #1 until the handle is close to the desired “feel”.
3.Tighten pivot #2 until it just starts to increase the force required to move the handle.
Pivot #1
Pivot #2
Fig. 42 — Joystick Adjustment
59
