Blade Guard Water Supply
Verify that the water hose on the saw is connected to the Blade Guard and that
the water pipes are pointed into both Blade Collars.
CAUTION
Make sure that the 90º outlets of the water tubes point toward the lower portion of the blade collars, aimed at the delivery ports, for proper water delivery to the blade.
Water Tube bracket
Water Tube aimed at groove in Blade Collar
Blade Collar
Fig. 8 — Water Tubes and the Blade Collar
Removing the Blade Guard
During use, the Blade Guard can become tight on the tapered mounting tab. To loosen it, wiggle the Rear Blade Guard Handle up and down, while lifting with the Top Handle.
26
