Raise — Lower Controls

This saw uses a 12-volt hydraulic pump and cylinder to raise and lower the

blade. The SP-6457 TD saw has a plunge button and a raise button. Controls are

located on the joystick handle.

1

2

3

Fig. 16 — Joystick Handle Controls

1.To slowly lower the blade to the cut, push the top button (1).

2.For a fast plunge to the cut, push the bottom button (2).

3.For a very fast plunge, press both buttons simultaneously.

4.To lift the blade, hold down the Raise button on the side of the handle (3).

See the Maintenance section of this manual for an illustration of the Raise-Lower

System components, and troubleshooting techniques.

35

Page 35
Image 35
Multiquip SP-6457 TD operation manual Raise Lower Controls, Joystick Handle Controls