HP J5780, J5788 Fax setup, To set tone or pulse dialing from the control panel, Set the fax speed

NOTE: If you select Pulse Dialing, some phone system features might not be available. It can also take longer to dial a fax or phone number.

NOTE: This feature is not supported in all countries/regions. If it is not supported in your country/region, Tone or Pulse Dialing does not appear in the Basic Fax Setup menu.

To set tone or pulse dialing from the control panel

1.Press Setup.

2.Press 4, and then press 6.

This selects Basic Fax Setup and then selects Tone or Pulse Dialing.

3.Press to select an option, and then press OK.

Set the fax speed

You can set the fax speed used to communicate between the HP All-in-One and other fax machines when sending and receiving faxes. The default fax speed varies by country/ region.

If you use one of the following, setting the fax speed to a slower speed might be required:

•An Internet phone service

•A PBX system

•Fax over Internet Protocol (FoIP)

•An integrated services digital network (ISDN) service

If you experience problems sending and receiving faxes, you might want to try setting the Fax Speed setting to Medium or Slow.

To set the fax speed from the control panel

1.Press Setup.

2.Press 5, and then press 7.

This selects Advanced Fax Setup and then selects Fax Speed.

3.Press to select one of the following settings, and then press OK.

Fax speed setting	Fax speed
Fast	v.34	(33600 baud)
Medium	v.17	(14400 baud)
Slow	v.29	(9600 baud)

Fax setup

In this section, you will learn how to set up the HP All-in-One so that faxing works successfully with equipment and services you might already have on the same phone line as the HP All-in-One.

Fax setup 23