4Finish setting up the HP All-in- One

After you have completed the steps in your Setup Poster, refer to this section to help you finish setting up the HP All-in-One. This section contains important setup-related information for your device, including information on setting preferences.

This section contains the following topics:

Set your preferences

Fax setup

Set your preferences

You can change the settings on the HP All-in-One so that it behaves according to your preference. For example, you can set general device preferences, such as the language used to display messages and the date and time on the display. You can also restore the device settings to what they were when you purchased your device. This will erase any new defaults you have set.

This section contains the following topics:

General preferences

Fax preferences

General preferences

Before you begin using the HP All-in-One, you should review and, if necessary, adjust the general device settings described in this section.

This section contains the following topics:

Set your language and country/region

Set the date and time

Set the scroll speed

Set the prompt delay time

Restore the factory defaults

Set your language and country/region

The language and country/region setting determines which language the HP All-in-One uses to show messages on the display. Usually, you set the language and country/region when you first set up the HP All-in-One. However, you can change the setting at any time by using the following procedure.

To set your language and country/region

1.Press Setup.

2.Press 7, and then press 1.

This selects Preferences and then selects Set Language & Country/Region.

Finish setting up the HP All-in-One

19