Chapter 12

3.Click the button that opens the Properties dialog box.

Depending on your software application, this button might be called Properties, Options, Printer Setup, Printer, or Preferences.

4.Make changes to the print settings, and click OK.

5.Click Print or OK in the Print dialog box to print the job.

For more information on choosing paper, see Understand specifications for supported media.

Power and connection messages

The following is a list of power- and connection-related error messages:

Communication test failed

HP All-in-One not found

Improper shutdown

Two-way communication lost

Communication test failed

Cause: The HP All-in-One is turned off.

Solution: Look at the display on the HP All-in-One. If the display is blank and the Power button is not lit, the HP All-in-One is turned off. Make sure the power cord is firmly connected to the HP All-in-One and plugged into a power outlet. Press the Power button to turn on the HP All-in-One.

Cause: The HP All-in-One is not connected to the computer.

Solution: If the HP All-in-One is not properly connected to the computer, communication errors can occur. Make sure the USB cable is securely connected to the HP All-in-One and the computer, as shown below.

248 Troubleshooting