8 Use the copy features

The HP All-in-One enables you to produce high-quality color and black-and-white copies on a variety of paper types, including transparencies. You can enlarge or reduce the size of an original to fit a specific paper size, adjust the darkness of the copy, and use special features to make high-quality copies of photos, including borderless copies.

TIP: For the best copy performance on standard copy projects, set the paper size to Letter or A4, the paper type to Plain Paper, and the copy quality to Fast.

This section contains the following topics:

Make a copy

Set the number of copies

Set the copy paper size

Set the copy paper type

Change copy speed or quality

Change default copy settings

Make a 10 x 15 cm (4 x 6 inch) borderless copy of a photo

Resize an original to fit onto letter or A4 paper

Resize an original using custom settings

Copy a legal-size document onto letter paper

Adjust the lightness and darkness of your copy

Enhance blurred areas of your copy

Enhance light areas of your copy

Stop copying

Make a copy

You can make quality copies from the control panel. Load multiple-page originals into the document feeder tray.

To make a copy from the control panel

1.Make sure you have paper loaded in the input tray.

2.Load your original print side down on the right front corner of the glass or print side up in the document feeder tray.

If you use the document feeder tray, place the pages so that the top edge of the document goes in first.

3.Do one of the following:

Press Start Copy Black to initiate a black-and-white copy job.

Press Start Copy Color to initiate a color copy job.

NOTE: If you have a color original, pressing Start Copy Black produces a black- and-white copy of the color original, while pressing Start Copy Color produces a full-color copy of the color original.

Use the copy features

73