HP J5780, J5788, J5750, J5740 manual Use the software

(continued)

Available	Description	Available when entering
symbols
		phone numbers, and monitor dial
		entries
-	When auto-dialing, the HP All-in-One	Fax header name, fax header
	enters a pause in the number sequence.	number, speed dial names, speed
		dial numbers, and fax or phone
		numbers
( )	Displays a left or right parenthesis to	Fax header name, fax header
	separate numbers, such as area codes,	number, speed dial names, speed
	for easier reading. These symbols do not	dial numbers, and fax or phone
	affect dialing.	numbers
W	When auto-dialing, W causes the HP All-	Speed dial numbers and fax or
	in-One to wait for a dial tone before	phone numbers
	continuing to dial.
R	During auto-dialing, the R functions the	Speed dial numbers and fax or
	same as a Flash button on your telephone.	phone numbers
+	Displays a plus symbol. This symbol does	Fax header name, fax header
	not affect dialing.	number, speed dial names, speed
		dial numbers, and fax or phone
		numbers

Use the software

You can use the HP Solution Center Software (Windows) or HP Photosmart Studio (Mac) Software (Mac) to access many features not available from the control panel.

The software is installed on your computer when you set up the HP All-in-One. For further information, see the Setup Poster that came with your device.

Access to the software differs by operating system (OS). For example, if you have a Windows computer, the HP Solution Center Software entry point is the HP Solution Center. If you have a Mac, the HP Photosmart Studio (Mac) Software entry point is the HP Photosmart Studio window. Regardless, the entry point serves as the launching pad for the software and services.

To open the HP Solution Center Software on a Windows computer

1.Do one of the following:

•On the Windows desktop, double-click the HP Solution Center icon.

•In the system tray at the far right of the Windows taskbar, double-click the HP Digital Imaging Monitor icon.

•On the taskbar, click Start, point to Programs or All Programs, select HP, and then click HP Solution Center.

2.If you have more than one HP device installed, select the HP All-in-One tab.

Use the software 15