HP J5780, J5788, J5750, J5740 manual To delete all the faxes in memory from the control panel

To delete all the faxes in memory from the control panel

▲Turn off the HP All-in-One by pressing the Power button.

All faxes stored in memory will be deleted from memory when you turn off the power to the HP All-in-One.

NOTE: You can also delete any faxes stored in memory by selecting Clear Fax Log from the Tools menu. To do so, press Setup, press 6, and then press 7.

Cause: An error condition is preventing the HP All-in-One from receiving faxes and Backup Fax Reception is set to Off.

Solution: Check for the following problems:

•The HP All-in-One is turned off. Press the Power button to turn on the device.

•The HP All-in-One is not set up properly for faxing. For more information, see Set up the HP All-in-One for faxing.

•There is no paper loaded in the input tray.

•There is a paper jam.

•The print cartridge door is open. Close the print cartridge door.

•The print carriage is stalled. Turn the HP All-in-One off, remove any objects that are blocking the print carriage (including any packing materials), and then turn the HP All-in-One on again.

After you resolve any problems found, the HP All-in-One can begin answering incoming fax calls.

Pages of a fax I received are missing

Cause: The paper is not loaded correctly in the input tray.

Solution: Make sure you have paper loaded correctly.

To load full-size paper

1.Remove the output tray.

Fax troubleshooting 199