2. BASIC OPERATION

2-3

2.3 Adjusting Brilliance and Contrast
The brilliance and contrast can be adjusted as below:
1. Momentarily press the [POWER/BRILL] key. The CONTRAST and BRILL
window appears.
CONTRAST
BRILL
10
8
PORT STBD
Contrast, brilliance window
2. Rotate the course control knob to adjust display contrast; clockwise to raise
the contrast and counter-clockwise to lower it. (16 levels are available.)
The contrast can also be adjusted by pressing the [POWER/BRILL] key.
3. Press the [PORT] or [STBD] key to adjust display brilliance, [PORT] to lower
the brilliance and [STBD] to raise it. (Eight levels are available.)
To close the CONTRAST and BRILL window, press any key except the
[POWER/BRILL], [STBD] or [PORT] key.
2.4 Displays

2.4.1 Choosing the display mode

There are four types of displays: Normal display 1 (page 1), Normal display 2
(page 2), Data display (page 3) and Graphic display (page 4).
To choose a display mode, press a mode key (AUTO, NAV or STBY). Each time
a mode key is pressed the display changes in the sequence shown below.
HDG
(Mode) (Course)
(Heading)
(Data)
PS
Heading mode
HDG
(Mode) (Course)
(Heading)
Heading mode
(Data1)
(Data 2)
PS
(Data)
(Normal display 1)
HDG
(Graphic)
Heading mode
(Mode)
(Course)
(Graphic display)
HDG
HDG
(Mode)
(Course)
(Heading)
Heading mode
(Data1)
(Data 2)
(Data display)
(Normal display 2)
Analog indicator
[1]
Page No.
[2]
[3]
[4]
Displays