Furuno CSH-5L/CSH-8L manual Setting the Tilt Angle, Automatic tilt on/off, 1-10, Tilt range

1. OPERATIONAL OVERVIEW

1.4Setting the Tilt Angle

The tilt angle shows the direction to which the sound wave is emitted. When the sound wave is emitted horizontally, it is said to be zero (0) degrees and when emitted vertically, 90 degrees.

To set a tilt angle, operate the TILT lever for the desired angle while watching the tilt angle indication at the top right corner of the sonar display. Each time the lever is operated the newly selected tilt angle is displayed in large characters for five seconds at the top of the sonar display. The tilt angle can be set in one-degree steps within the range of 0 to 55 degrees.

Transducer

0￿Horizontal direction (tilt: 0)

Tilt angle range

+55￿

Tilt range

1.4.1Automatic tilt on/off

The automatic tilt feature automatically tilts the transducer within the tilt range selected on the menu. This feature is useful for finding fish school center.

Automatic tilt becomes inoperative when the target lock feature is made active. Disable the target lock feature to resume automatic tilt.

1.Press the [MENU] key to open the menu.

2.Operate the [RANGE] control to choose [MENU MODE] at the top of the screen.

3.Operate the [GAIN] control to choose SONAR.

4.Operate the [RANGE] control to choose AUTO TILT.

5.Operate the [GAIN] control to choose ON.

6.Operate the [RANGE] control to choose TILT ANGLE.

7.Use the [GAIN] control to choose a tilt range among ±2-10°, ±4-14°, ±6-20°, and ±10-26°. See the table on the next page for range and tilt angle.

8.Press the [MENU] key to close the menu. When auto tilt is on, auto tilting begins with the range selected (at step 7), centered on the tilt angle set with the TILT lever.

To turn off automatic tilt, choose OFF at step 5. Note that automatic tilt range varies with the range in use.

1-10