Furuno CSH-5L/CSH-8L manual Transmitting, SONAR menu

1. OPERATIONAL OVERVIEW

1.3.3Transmitting

TRANSMISSION in the SONAR menu is off in the default setting. If it is has been set to ON, the procedure below is not necessary. When the transducer is lowered, transmission starts and when it is raised transmission is stopped.

1.Press the [MENU] key to open the menu.

2.Use the [RANGE] control to choose [MENU MODE] at the top of the screen.

3.Use the [GAIN] control to choose SONAR.

** SONAR MENU		**	(RANGE CTRL: U/D, GAIN CTRL: L/R)
[MENU MODE]	:	SONAR	SOUNDER	MARKS		SYSTEM
DISPLAY MODE	:	COMBI-1	NORM	COMBI-2
TX OUTPUT	:	8
PULSE LENGTH	:	8
TX CYCLE	:	10
TVG NEAR	:	6
TVG FAR	:	7
AGC	:	2
2ND AGC	:	1
NOISE LIMITER	:	3
COLOR CURVE	: 1		2	3	4
COLOR RESPONSE	:	1	2			4
				3
DELETE COLOR	:	0
ECHO AVERAGE	:	1
INT REJECT	:	1
HOR BEAMWIDTH :		WIDE	NARROW
VER BEAMWIDTH :			NARROW
		WIDE
COLOR	:		2	3	4
		1
ERASE MARKS	:	TRACK	SHIP	EVENT		FISH
ALARM LEVEL	:	9
AUTO TRAIN	: ON		OFF
TRAIN SECTOR	: ±10￿￿		20￿￿	40￿￿		60￿
AUTO TILT	: ON
			OFF
TILT ANGLE	: ±2-10￿￿		±4-14￿￿	±6-20￿￿		±10-26￿
TRANSMISSION	: ON		OFF
AUDIO VOLUME	:	10
ASSIGN SETTING	:	F1 KEY	F2 KEY	F3 KEY		F4 KEY
ASSIGN MENU	:	EXECUTE

PRESS [MENU] KEY TO EXIT

SONAR menu

4.Use the [RANGE] control to choose TRANSMISSION.

5.Use the [GAIN] control to choose ON. The sonar starts transmitting and the sonar picture appears.

6.Press the [MENU] key to close the menu.

To turn off transmission, choose OFF at step 5. “TX OFF” appears at the top right corner of the sonar display when the transmitter is turned off.

1-4