Furuno CSH-5L/CSH-8L manual Choosing a display mode, Mode description, Description, Display

1. OPERATIONAL OVERVIEW

1.3.5Choosing a display mode

Three display modes are available: NORMAL, COMBI-1 and COMBI-2. To choose the display mode, do the following:

1.Press the [MENU] key to open the menu. The last-used menu is displayed.

2.Use the [RANGE] control to choose [MENU MODE] at the top of the screen.

3.Use the [GAIN] key to choose SONAR.

4.Use the [RANGE] control to choose DISPLAY MODE.

5.Use the [GAIN] control to choose desired mode among COMBI-1, NORM and COMBI-2.

6.Press the [MENU] key to close the menu.

Mode description

Mode	Description		Display
NORM	This mode is useful for detecting
(Sonar	and tracking fish schools.
display)	Navigation data can be displayed			Text window
	in the text window, with
	connection of appropriate
	sensors.	Sonar display

COMBI-1	Sonar picture appears on the left	Range and bearing marks
(Sonar +	and the audio display at the lower
Audio)	right side of the screen. This	Text window
	mode is useful analyzing echoes
	in a desired area.	Audio display
	To activate the COMBI-1 mode,
	do the following:	Sonar display

1.Choose the COMBI-1 mode.

2.Use the trackball to place the trackball mark (+) on the bearing desired.

3.Press the [R/B] key. The range and bearing marks are inscribed on the sonar picture, and the signal along the bearing mark appears in the audio display.

COMBI-2	The sonar picture appears on the		Text window
(Sonar +	left and the signal fed from the
echosounder)	echosounder at the lower right
	side of the screen. This mode is		Echosounder
	suitable for judging fish school		display
	concentration.	Sonar display

1-6