2.3 Telephone
2.3 Telephone
General | The telephone can be installed on a tabletop or a bulkhead. |
| Select a location where the unit can easily be operated. |
| For installation on a wooden table, use the mounting |
| base and tapping screws (supplied). |
| For installation on a steel table, fix the telephone with |
| nuts and bolts. |
| For bulkhead mounting, use the bulkhead mounting |
| base (supplied with telephone accessories). |
Mounting location Select a location where temperature and humidity are moderate and stable. Secure sufficient space around the unit for ease of operation and maintenance.
Mounting
Mounting Base Table top: Use installation materials.
Bulkhead: Use telephone accessories.
Secure |
mounting |
base with |
tapping |
screws. |
Attach |
handset |
supporter |
here. |
Unfasten |
this |
screw. |
The mounting dimensions are given in the outline drawing at the end of this manual. Determine the mounting loca- tion, leaving sufficient space around the unit, and then fix the mounting base to the mounting location. The mounting base is different for bulkhead and tabletop mounting, however the mounting procedure is the same for all.
1.Fix the mounting base to the mounting location with four tapping screws (4 × 16).
2.On the underside of the telephone, unfasten the screw shown in the figure at left. (The screw may be discar- ded.) Attach
3.The catch in the receiver cradle functions to hang up the handset completely. Set the catch in the upward position as shown below. (To detach the handset from the hanger, slide the handset upward.)
Bottom View
Mounting Base Stopper
To remove the telephone from mounting base, press the mounting base stopper, and slide telephone forward.
Handset Supporter
Catch
4.Set the telephone to the four catches in the mounting base and then slide it toward you until you hear a click.
5.Attach the "SLIDE" label (supplied) to the handset.
6.Attach English language label (supplied) to the tele- phone.
