Furuno FELCOM 81B, FELCOM 81A manual Connection Card Reader, FELCOM81

4.4 Card Reader

・The card reader should be installed nearest the most frequently used telephone.

・The card reader connects to the communications unit (IB-281) of the FELCOM 81 with two connection cables (supplied) whose total length is 6.5 meters. Longer lengths are optionally available.

Connection of

Card Reader

FELCOM81

IB-281

Communication

Unit

Connection cable ② Connection cable ①

Card Reader

Converter Connector

AC adaptor

・Power

Power the card reader with 100 VAC power. An AC adaptor comes with the card reader for plugging the equipment in an electrical outlet.

・Connection cable 1

Connect the 8-pin connector to the card reader and the 25-pin connector to the converter connector.

・Connection cable 2

Connect one end of the cable (type 16S0214, 5 m) to the CARD READER connector on the communications unit and the other end to the converter connector.

If the standard connection cables are not long enough, longer cables are optionally available, or use the internal modem (option). Install longer cable when the distance to the communications unit is between 5 and 150 meters and use the modem when the distance is between 150 and 1000 meters. See page S-2a for details.

4-4