7.3 Confirming VHF Section Settings

You can confirm VHF section settings as shown below. To change VHF section settings, contact FURUNO agent or dealer for ser- vice.

How to confirm VHF section settings

At screen 1 on page 7-1, select “RT” and press the [ENT] key.

Then, follow the procedure below.

Press the [CANCEL] key to go to previous display.

RT 1-Mode: USA/WX PRIV

protected ON OFF

Press the [ENT] key.

RT 2-Hookworking: CH16 SP

protected ON ON

Press the [ENT] key.

RT 3-Time out timer: off

protected

Press the [ENT] key.

RT 4-Tx AF monitor: OFF

protected

Press the [ENT] key.

RT 5-Auto 1W: ON

protected

Press the [ENT] key.

RT 6-Scanning: DW SCAN

protected

OFF OFF

Press the [ENT] key.

RT 7-AutoSQ: LOW HIGH HOLD

protected 00 03 30

Status (ON/OFF) of USA/WX and PRIV channels

In on-hook state, CH16 and speaker status appear.

CH16: ON>Automatically switches to CH16 when handset is on hook.

SP: ON>Handset is off hook: SP is OFF. Handset is on hook: SP is ON.

Time-out timer status (ON/OFF)

ON: Monitors Tx AF signal from RB-700, Wing HS, HS and DSC.

Automatic TX power reduction status (ON/OFF)

Dual watch and scanning status (ON/OFF).

Auto squelch threshold levels for low, high and hold.

To escape, press the [ENT] key and then press the [CANCEL] key twice. To see VHF channels, press the [ENT] key twice.

7-3

Page 77
Image 77
Furuno FM-8700 manual Confirming VHF Section Settings, How to confirm VHF section settings