Furuno FM-8700 manual From previous, Transmission time about 0.5 seconds

(from previous page)

Telecom1??

Telecom2:

Press the [SELECT] key. (To eselect telecommand 1.)

Telecom1 < >

SMP Dup DAT FAX NO

Select mode desired.

Press the [ENT] key.

Channel?

Press the [SELECT] key.

Usually select SMP or DUP .

Note; Working channel is normally set by coast station. Therefore, set up for "No information" by setting the working channel as 9999.

Working channel <	>
input digit =

Enter channel followed by [ENT] key.

*Ready for calling

INDIVIDUAL CALL CH70

Press the [CALL] key.

*Call in progress

INDIVIDUAL CALL CH70

Transmission time about 0.5 seconds

* Wait for ack BQ *

To cancel message prepared, press the [CANCEL] key.

(Return to normal display.)

(Transmitting)

Next CH70 5.0 min

Counts down from five minutes. Regulations prohibit calling to

same station during this time.

Continued on next page.

4-3