Furuno FR-2155 manual Control head modification procedure, Removing the control head

8.Unfasten four screws fixing the right and left brackets on the control head.

9.Unfasten four screws fixing the right and left covers on the display unit. 10.Unfasten six screws fixing the right and left KB arms.

11.Unfasten three screws fixing the panel cover.

KB arm (L) 03-144-1341

M5X25 SUS• 3 pcs.

Panel cover 03-144-1345

M4X10, 3 pcs.

Control head

KB arm (R) 03-144-1342

M5X25 SUS 3 pcs.

M5X25 SUS 4 pcs.

Figure 1-14 Removing the control head

Control head modification procedure

1.Unfasten eight screws (M4X8) on the underside of the control head. Unplug connectors P314, P312 and P317 from the control head. Separate the KB bot- tom plate from the control head.

2.Unfasten the screw (M4) fixing the ground terminal and two screws (M4X8) fixing the clamp. Remove the connection cable assy.

3.Unfasten two screws (M6X12) from the inside of the bottom plate of the control head to dismount the handle.

4.Replace the cable assy. with cable assy. UL2464SB2-0P/1P (10 m, supplied) as below and reassemble the control head.

1-11