Power supply unit PSU-001
Two cables run to the Power Supply Unit PSU-001, the power cable (DPYCY- 3.5) and the signal cable (660V-MPYCY-16). The figure below shows the loca- tion of the terminal boards inside the PSU-001. Wire the unit as shown in the interconnection diagram.
5Vinyl sheath
| | | | | ANTI-CORROSIVE |
| | | | | SHEATH | | |
Armor | 150 mm | | | 10 | 5 | Vinyl sheath |
| | | | | | | |
| Vinyl tape | Crimp-on lug | | | | | | |
| | FV5.5-4 | | Armor | Vinyl tape |
| Clamp here. | | | | Clamp here. |
| | | | |
| Power Cable DPYC-3.5 | | Signal Cable 660V-MPYCY-16 |
| | | | | | | | |
| | | | | | | | |
| | | Core No. | | Connected to | | Crimp-on Lug | |
| | | | | | | | |
| | | 1 to 9 | | PTB2 | | FV1.25-M3 (Red) | |
| | | | | | | | |
| | | 10 to 16 | | PTB1 | | FV2-4 (Blue) | |
| | | | | | | | | |
Figure 2-16 Fabrication of power cable and signal cable
PTB2
PTB1
Cable clamp
Figure 2-17 Power supply unit PSU-001
