2. OPERATION
2.7 Calling a Specific Intercom Station
1.Press the [Intercom Select] key until the indicator lights on the desired intercom station. After a
2.Press the PTT switch on the microphone and speak into the microphone.
3.Release the PTT switch to listen for a reply from the selected intercom station. If necessary, adjust listening volume with the [LISTEN VOL] control.
4.After completing your conversation, press the [Hail Select] key to return to the standby mode.
Note: To call a specific intercom stations while sounding warning signals, see page 17.
2.8 Receiving a Call from an Intercom Station
When an intercom station is calling the main station, the indicator for the calling station flashes on the main station’s indicator and a tone sounds while the intercom station operator is pressing the station’s calling switch.
Automatically selecting a single calling station
1.In the standby mode, press the PTT switch on the microphone to answer the call. The
2.If necessary, adjust listening volume with [LISTEN VOL] control.
3.After you have finished your conversation, press the [Hail Select] key to return to the standby mode.
Automatically selecting multiple calling stations
When you receive a call from more than one station, the appropriate intercom station indicators flash and a tone sounds.
1.In the standby mode, press the PTT switch on the microphone. When calls are received simultaneously, the
2.After you have completed your conversation, press the [Hail Select] key to return to the standby mode.
3.Press the PTT switch on the microphone again and the next
4.After you have finished all intercom conversations, press the [Hail Select] key to return to the standby mode (“ALL” indicator lights).
Calling all intercom stations while an intercom voice is selected
1.Press and hold the [Hail Select] key.
2.Press the PTT switch on the microphone and speak into the microphone. All station indicators flash.
12
