access the 32k+ variable colour setting mode. See Page 10 for more information
11. BAND/SEARCH 
a)In Tuner mode, press this button to cycle through Bands: FM1, FM2, FM3, AM1 (MW1) or AM2 (MW2).
b)In Media playback mode, press to access the folder / file search mode.
c)In iPod/iPhone playback mode, press this button to access the iPod/iPhone search functions.
12. MENU 
Press to access the system menu. See Page 9 for menu options.
13.TUNE UP/DOWN, FILE & TRACK UP/DOWN & FAST FORWARD/BACK
a)TUNE UP/DOWN. In tuner mode, press this button to Auto Seek to the next station or press and hold this button to manually tune in to your desired station.
b)FILE & TRACK UP/DOWN. In CD or USB/SD media playback mode, press these buttons to skip a chapter, track or file.
c)FAST FORWARD/BACK. In USB/SD media playback mode, press and hold momentarily to fast forward/rewind.
14. SOURCE BUTTON 
Press the Source Button to cycle through the following sources if available: Radio: CD: USB: SD: AUX
AUDIO FUNCTIONS
All Audio functions are easily accessable on the
AUDIO MENU. Press the ENCODER VOLUME CONTROL to access the Audio Menu mode. Then press ENTER or
TUNE UP 
to select the Audio Function to be adjusted, then rotate the ENCODER VOLUME CONTROL to select the desired setting. You can always return to the previous
Audio Function by pressing the TUNE DOWN 
button.
REMINDER
In the AUDIO MENU, or in any menu, you can quickly exit the menu by pressing the ESC/RGB button
EBX ON/OFF: | Turn ON or OFF the EBX (Encounter Bass |
| Xtender) Bass Boost. |
BAS | Adjust the Bass level between |
TRE | Adjust the Treble level between |
BAL (Balance) | Adjust the balance between the right and left |
| speakers from 12R (full right) to 12L (full left). |
FAD (Fader) | Adjust the fader between the front and rear |
| speakers from 12R (full rear) to 12L (full front). |
(SUBWOOFER) |
|
SW ON/OFF | Turn On or Off the Subwoofer RCA output. |
SW LPF | Subwoofer low pass crossover: 80/120/160Hz |
SWAM ON/OFF | In AM mode, turn ON or OFF the Sub output. |
NOTE
If the Subwoofer RCA output is set to “OFF”, then the SW LPF & SWAM functions will not be displayed.
EQUALISER OPERATION
When you activate the Equaliser, the
Press the Equaliser button repeatedly to cycle through the following
To return to the Bass & Treble settings that were in use before the EQ was selected, please select the USER setting.
SYSTEM MENU
Press 
(MENU) to access the System Menu and press again to select the item be adjusted, then rotate Encoder Volume Knob to select a value / option. To exit this menu at any time, press the ESC/RGB button
STORE (Auto store)
While in Tuner mode, press the ENCODER VOLUME CONTROL to activate Auto Store. The six strongest stations of the selected band will be saved in the preset channels automatically
RDS ON/OFF
While in Tuner mode, this selection turns On or Off RDS. RDS Functions are explained in more detail on Page 8. If RDS is set to OFF, then the RDS Functions indicated below with an * will not appear in the System Menu
PTY* (Program Type)
Press the ENCODER VOLUME CONTROL to enter program type, then rotate the ENCODER VOLUME CONTROL to select the category.
AF* ON/OFF
Turn On or Off the Alternate Frequencies function.
TA* ON/OFF
Turn On or Off the Traffic Announcement function.
REG* ON/OFF
Turn On or Off the Set Region for Alternate Frequencies function
CT* ON/OFF
Turn On or Off the CT function.
LOC* ON/OFF
(Local/Distance). Use this setting to Auto Seek to strong local stations (Local) or all stations regardless of their strength (Distance).
AREA
Select your country/region for the tuner: OCEANIA (Australia/New Zealand); USA; EUROPE;
RUSSIA & press ESC/RGB | to save. |
CLK (Clock)
To set the clock, rotate the Encoder Volume Control to set the hours (Note “A” or “P” will be displayed in the
CLK 12H/24H (Clock Format)
Select the time format 12H or 24H
BEEP ON/OFF
Select On or Off to activate button confirmation beep tones.
| 8 | 9 |
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
