desired Artist then press ENTER. Rotate the Encoder Volume Control to then select an Album & press ENTER. Rotate the Encoder Volume Control again to select a song within the selected Album.

ALBUM Rotate the Encoder Volume Control to select your desired Album and press ENTER to select it. Then rotate the Encoder Volume Control to select a specific song within the selected Album.

SEARCH FOR FURTHER CONTENT on iPod/iPhone

In addition to the PLAYLIST/ARTIST/ALBUM seach functions, there are also additional fields you can search on your iPod or iPhone – the full list of fields is as follows:

PLAYLIST / ARTIST / ALBUM / SONG / GENRE / COMPOSER / AUDIOBOOK / PODCAST

3.Rotate the Encoder Volume knob to select the desired search field, then press ENTER to confirm.

4.Rotate the Encoder Volume knob to select the desired selection within the field then, press ENTER to confirm.

NOTE

When searching for Album, Artist, Song etc, rotate the Encoder Volume Control clockwise to search from A-Z or anti-clockwise for Z-A search.

RANDOM PLAY

Press RDM to cycle between the following modes: RDM FLD – Plays the current album randomly.

RDM ALL – Plays the whole iPod/iPhone library randomly.

RDM OFF – Turns the Random function off.

iPod/iPhone MASTER CONTROL MODE

Press the button

to switch between the two

control options

 

Unit control mode: Use the head unit controls to select Track/Artist/Album/Playlist etc. This is the Default setting.

iPod/iPhone control mode: Use the iPod/iPhone to select the Artist/Album/Track etc.

This mode is useful if you need to sort through a large amount of Tracks/Albums etc.

NOTE

When using an iPhone, the LCD Screen will display [iPod] upon connection to indicate “Music” section of the iPhone is in use.

MEDIA PLAYBACK (USB/SD/AUX IN)

MEDIA PLAYBACK

Use the following functions during media playback:

Press to pause the music playback. Press this button again to resume music playback.

NOTE the volume level can be adjusted while the unit is paused

Press the to skip forward to the beginning of the next or previous chapter/track.

Press and hold to fast forward or fast rewind through the track.

USB OPERATION

Insert the USB Device

1.Open the cover marked on the front panel.

2.Insert the USB device into the USB socket. The unit will start playing from the USB device automatically.

Removal of the USB Device

Before removing the USB device from the front panel, always remember to switch to another Source then remove the USB device.

SD CARD OPERATION

Insert the SD Card

1.Press the OPEN button to remove the front panel.

2.Hold the left hand side of the panel & pull forward to disengage it from the chassis.

3.Insert the SD card into the slot with label facing left until a “CLICK” sound is heard.

4.Replace the front panel and the unit will start playing files from the card automatically.

Removal of the SD Card

Detach the face and press the card until you hear a click sound. The card is now disengaged. You can then remove the card.

NOTE

Please ensure that USB devices & SD cards contain WMA or MP3 files only.

USING AUX-IN

Connect the external device to AUX in jack using a 3.5mm stereo Aux In cable (not supplied) located on the face, then press the Source button to select AUX mode. Press the Source Button again to select other source options.

 

12

13

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 7
Image 7
Fusion CA-ML600 instruction manual Media Playback USB/SD/AUX