Gaggenau KG 291 CA Important! Only clean the burner parts when cold, Part / Material, anodized

Models: KG 291 CA

1 22
Download 22 pages 25.81 Kb
Page 17
Image 17
•Important! Only clean the burner parts when cold!

Do not use scouring agents, abrasives or chemically aggressive cleaners (for example oven cleaner)! Do not use any nitro polishing agents for cleaning! Do not use any abrasive sponges either.

Before cleaning, please wait until the cooktop has cooled.

First lift one of the pot grids on the side with both hands (be careful not to scratch the base). Then remove the remaining two pot grids.

Remove the burner head cover, the burner ring and the burner head.

Important! Only clean the burner parts when cold!

Soak burnt-in remainders in a little water and detergent. This loosens even the most stubborn of soiling. Do not use any abrasive agents and abrasive sponges.

Only use very little water to clean your cooktop. Be careful that no water enters the burner base.

As the result of heat development, slight dis- coloration can appear on the stainless steel surface. Do not attempt to scrape away such discoloration. This damages the surface. Distribute stainless steel care agents uniformly and thinly on the hob (not on the control panel!). This will ensure an even surface and will keep your hob in a good condition for a long period of time.

Make sure the burner parts are dry before assembly. Only operate the appliance with all parts dry. Damp burner parts will cause malfunctions when igniting or unstable flames.

When assembling the burner parts, make sure that the burner ring and burner head are placed in such a way that the locking lugs fit in the corresponding recesses.

Important! Fit the middle pot support first (be careful to center it over the burner) and then the pot supports on the side. The rounded corners of the pot supports on the side must face out to the side.

Part / Material

Suggested Cleaning Procedure

Important Reminders

 

 

 

Control Panel

Use cloth with detergent and hot water.

Do not use strongly alkaline cleaning

(anodized

Remove greasy splashes with a

agents. These cleaners may cause

aluminum)

commercially available cleaner for

permanent discoloration!

 

aluminum. Make sure the cleaning

 

 

agent will not scratch the surface.

 

Control Knobs

Use cloth with detergent and hot water.

Do not clean in a dishwasher.

(mat chromium plated )

see next page

16

Page 17
Image 17
Gaggenau KG 291 CA Important! Only clean the burner parts when cold, Part / Material, Suggested Cleaning Procedure