1. Important notes
1.1 For your safety
You must not operate the appliance if it is damaged.
The appliance must only be connected by an authorised specialist, paying attention to the relevant regulations of the power supply companies and the regional construction regulations.
Also observe the assembly instructions!
Please note that connecting cables must not come into contact with hot cooking surfaces when connecting electrical appliances next to the steam cooker.
The user is responsible for expert use and the perfect condition of the appliance.
Only ever operate the appliance under supervision.
The appliance must not be operated empty!
Caution: fire risk! Do not store any combustible objects in your appliance. When operating the appliance, only ever leave the inner parts inside the cooking compartment that you actually need.
Caution! The appliance gets hot during operation. Keep children away!
Do not clean the appliance with a steam cleaning apparatus or with water pressure because this poses a risk of
Isolate the appliance from the mains during every maintenance operation. To do this, remove the mains plug or actuate the corresponding fuse.
Repairs must be carried out by authorised specialists, thus ensuring electrical safety.
No warranty claims can be lodged in the event of damage caused by failure to observe these instructions.
Technical modifications reserved.
1.2 Operating for the first time
Before operating the appliance for the first time, please pay attention to the following notes:
–The appliance must be installed and connected by a specialist before it is operated for the first time.
–Conscientiously read through the operating and assembly instructions before operating the appliance for the first time.
–Remove the packaging from the appliance and dispose of it properly. Pay attention to the fact that there are accessories in the packaging. Keep packaging elements out of the reach of children!
–Remove all removable interior parts before operating the appliance for the first time.
–Thoroughly clean the appliance before using it for the first time. (see chapter entitled “Cleaning and care").
–Before operating the appliance for the first time, check that the mains connection is in proper working order.
–The rating plate for this appliance is included with the instructions on a separate sheet. Store the rating plate in the same location as your operating and assembly instructions!
Boiling point adjustment (calibration):
The appliance must be calibrated before
Boiling point adjustment is absolutely necessary because the boiling point of water depends on your location in relation to mean sea level. Failure to adjust the boiling point may result in malfunctions.
3
