Gaggenau VK230610 manual

Fig. 14

Fig. 15

Note:

Allow the water or the cooking liquid to cool down before draining it: This avoids steaming in the base cabinet and scalding. Pay attention to regular descaling if the water is highly limey. Otherwise, discoloration and heat build-ups may be the result.

Draining the cooking liquid from the cooking basin:

Proceed as follows:

–If you do not have a permanently fitted water connection, place a vessel (e.g. a 10 l bucket) under the drain valve of the additionally installed drain installation set AG 060-000.

–Turn the “Temperature" control knob to the left to the (Drain valve) position.

–Turn the “Short time" control knob to the left to the position and hold the knob in this position (Fig. 14).

–An audible signal is sounded. The symbol (Drain valve) flashes on the display after a few seconds. The drain valve is opened.

–The (Drain valve) symbol lights up permanently in the display when the drain valve is open.

Closing the drain valve:

–Turn the “Temperature" control knob to the left to the (Drain valve) position.

–Turn the “Short time" control knob to the right to the + position and hold the knob in this position (Fig. 15).

–An audible signal is sounded. The symbol (Drain valve) flashes on the display after a few seconds. The drain valve is closed.

–The symbol (Drain valve) goes off as soon as the drain valve has been closed.

Note: The (Drain valve) symbol flashes on the display if the drain valve is not completely open or closed.

If you do not have a permanently installed drainage connection, place a temperature-resistant receptacle of a corresponding size (at least 10 l) under the drain valve and install the drain installation set AG 060-000.

10