Steady on
Blinking
• Turn the selector switch clockwise to set it to the “ 
”position.
• Only the following icon will be displa- yed steady on.
• Fill the cup with hot water to the desi- red level; to stop hot water dispensing, turn selector switch 
” position. The machi- ne returns to the normal operating mode.
Occasionally, after turning the selector switch, hot wa- ter may not be dispensed and the
following displayed icon will start blinking. Simply wait until the end of the
STEAM DISPENSING / PREPARING A CAPPUC CINO
Steam may be used to froth milk for a cappuccino, as well as to reheat other beverages.
Danger of scalding! Brewing 
may be preceded by small jets of hot water. The steam wand may reach high temperatures. Never
touch it with bare hands.
Important note: immediately after using the steam to froth the milk, clean the steam wand (or
Pannarello when provided). When the machine is ready, brew a small amount of hot water in a glass and clean the steam wand (or Pannarello when provided) externally. In this way, all parts will be perfectly clea-
Blinking
Steady on
ned and free of any milk residue.
To prepare your cappuccino, we recommend discharging
the water in the steam wand.
•To discharge the water in the steam wand, place a container under the steam wand (Pannarello, if supplied).
•When the machine is ready to brew
coff ee, turn selector switch counter-
clockwise to set it onto the “
” po- sition. Residual water may come out of the steam wand (Pannarello, if supplied).
•The icon blinks during the preheating time required by the machine.
•Steam dispensing will begin when the icon is displayed steady on; soon after, only steam will begin to come out.
•Turn the selector switch clockwise and
set it back to the “
” position to stop dispensing steam.
•Fill 1/3 of the container you wish to use to prepare the cappuccino with cold milk.
To ensure better results when preparing a cappuc- cino, use cold milk straight from
the fridge.
• 34 •
