Introduction
TCP/IP Print Servers, not to be confused with Network Print Servers such as HP JetDirect, are used to receive and distribute messages to the various Apollo® printing devices. This includes Ticket Printer, Itinerary/Invoice Printers, OSDP Manager and back office Accounting Interface (MIR).
Galileo also provides Focalpoint Print Manager™, a Windows™ based print distribution application. If you use this solution for Galileo® or Apollo® host printing, please refer to the instruction guide for that application to make appropriate changes.
This document will provide the steps required in changing configuration settings. These include:
IP Address, Subnet Mask and Default Gateway: Used to communicate with the Host Reservation System
Configuration Servers: The servers used to authenticate users into the Galileo® or Apollo® system
Client Identifier: Alphanumeric code used to authenticate users into the Galileo® or Apollo® reservation system.
GTID (Global Terminal Identifier): A six digit alphanumeric code used by Apollo® or Galileo® to identify a print device.
Before you begin
Gather the information indicated above from your Travel Management Company or Apollo Account Representative:
IP ADDRESS: | ____.____.____.____ |
|
SUBNET MASK: | ____.____.____.____ |
|
DEFAULT GATEWAY: | ____.____.____.____ |
|
CONFIG SERVER ADDRESS: ____.____.____.____ (Primary) | ||
| ____.____.____.____ (Secondary) | |
Note: Config Servers for Apollo® System: | 198.177.164.151 (Primary) | |
|
| 198.177.164.152 (Secondary) |
Note: Config Servers for Galileo® System: | 57.8.81.13 (Primary) | |
|
| 57.8.81.113 (Secondary) |
GTIDS: | #1: __________ | #2: __________ |
| #3: __________ | #4: __________ |
| #5: __________ | #6: __________ |
| #7: __________ |
|
Note: Print Servers may be configured with less then 7 GTIDS.
TCP/IP Print Server – Changing TCP/IP or Host Access Configuration (10/29/01 mlr) | 3 |
