TCP/IP Print Server – Changing TCP/IP or Host Access Configuration (10/29/01 mlr)
7
From the TCP/IP Print Server Configuration Utility, arrow left to the CONFIGURE drop down
menu.
File Configure Help
IP Stack
Network Parameters
Printer Ports
Manual Override
Arrow to select “NETWORK PARAMETERS” or press “N”.
Primary Config Server Address : 198. 177. 164. 151
Secondary Config Server Address : 198. 177. 164. 152.
Client Identifier : pdenxx00
ESC to Cancel, CTRL + ENTER to Store
If a change is needed, enter the correct IP Address for the Primary and Secondary Configuration
Servers based on the reservation service you are connecting to:
Config Servers for Apollo® System: 198.177.164.151 (Primary)
198.177.164.152 (Secondary)
Config Servers for Galileo® System: 57.8.81.13 (Primary)
57.8.81.113 (Secondary)
If an IP address has an octet less then three characters in length, DO NOT ENTER A LEADING
ZERO (example: enter “15” not “015”).
Change the Client Identifier if needed. This ID is an 8 character alphanumeric code used in the
authentication process. The Client ID is case sensitive so enter the ID exactly as it was given by
your Apollo or Galileo Account Representative.
When finished, press CTRL+ENTER to store.