Gardena T 1030 Plus Change watering start time, Change watering duration, Manual watering ON

GB

Change watering start time:

1

According to the setting of the Frequency control knob 2, the next watering starts after the set frequency has elapsed (e.g. 8h = after 8, 16, 24... hours).

If a sensor inserted in the Water Timer indicates moist, the programmed irrigation is not carried out.

Set watering start time again.

1.Turn Run-Timecontrol knob 1 counter-clockwise to Reset. After 2 seconds, the current time is set as the new watering start time.

2.Turn Run-Timecontrol knob 1 back to the desired watering period again.

Change watering duration:

1

Manual watering (ON):

1

On hot or cool days, the watering duration can be changed before the program starts, without the watering frequency and watering start time being changed.

vTurn Run Time control knob 1 to the altered watering duration (e.g. : 15 minutes).

If the watering duration is changed while a program is running, the following applies:

•If the altered watering duration is longer than the old watering period, the new watering duration applies.

•If the altered watering duration is shorter than the old watering period, watering is ended after one minute.

The valve can be opened or closed manually at any time. The watering start time and watering frequency are retained.

vTurn Run-Timecontrol knob 1 clockwise to ON.

The valve is opened for 30 minutes, independently of the program set.

To reactivate the set program, the previously set watering duration must be set again.

Bad weather function (OFF):

1

The valve can be closed manually at any time. A program- controlled open valve can be closed prematurely without the watering start time and watering frequency being changed.

vTurn Run-Timecontrol knob 1 to OFF.

The valve is closed or remains closed independently of the program set.

To reactivate the set program, the previously set watering duration must be set again.

6