Gardena T 1030 Plus manual Available accessories, Technical Data

GB

Fault	Possible cause	Remedy
Watering is not	A connected sensor indicates	v Moisture level setting on
carried out	sufficient moisture.	soil moisture sensor.
	Tap turned off.	v Turn on tap.
Watering program is run	Turned to Reset in between.	v Set start time again
at the wrong time		(see 5. Operation).
Battery used up after	Battery used not alkaline.	v Use alkaline battery.
short period of operation

In the event of other faults please contact GARDENA Service.

ARepairs should only be carried out by GARDENA service centres or dealers authorised by GARDENA.

9.Available accessories

GARDENA		Art. No. 1188
Soil Moisture Sensor
GARDENA		Art. No. 1189
Rain Sensor electronic
GARDENA		Art. No. 1815-00.791.00
Anti-theft device		From GARDENA Service
GARDENA	(to connect older GARDENA	Art. No. 1189-00.600.45
Adapter cable	sensors)	From GARDENA Service

10. Technical Data

Min. /max. operating pressure:	0.5 bar / 12 bar
Minimum flow rate:	20 l/h
Flow medium:	Clear fresh water
Max. liquid temperature:	40 °C
Number of program-controlled
watering cycles per day:	3 x (every 8 hrs.), 2 x (every 12 hrs.), 1 x (every 24 hrs.)
Watering cycles per week:	Every day, every 2nd, 3rd or 7th day
Watering duration program:	1, 2, 3, 4, 5, 6, 8, 10, 15, 30, 60, 90,120 mins.
Battery required:	1 × 9V alkaline manganese (alkaline) battery
	type IEC 6LR61
Operating time of the battery:	approx. 1 year

8