Installation

Installing the Wiring Harness

Power/Data

Connection

Speed Temp Transducer

Connecting a Transducer to Multiple Sensors

6

Wiring Harness Installation (continued)

If your boat does not have a fuse block, the unit can be wired directly to the battery. Make sure the 2-Amp in-line fuse supplied with the unit is installed.

The Fishfinder 100 can be connected to another piece of NMEA compatible electronic equipment. If equipped with a capable transducer, the Fishfinder 100 sends depth, temperature and speed information that could be displayed on another device.

2-Amp In-Line Fuse