Appendix C

Fishfinder 100 Portable

Secure Fishfinder 100 to the boat using the provided eyelets

36

Fishfinder 100 Portable

The Portable Case

The Portable Case is designed for rugged use and provides storage for the Battery Pack and the Portable Suction Cup Transducer and a mount for the Fishfinder 100. The case is water resistant but is not designed to float in the event it should go overboard.

Use the two square eyelets located by the handle to secure the Fishfinder 100 Portable Case to the boat.

The Suction Cup Transducer

Using the Portable unit you will still need to find a suitable location for the transducer. If you are in a slow moving boat such as a canoe or flat bottom boat, the mounting location is not as critical. Follow these simple guidelines and you should be fine.

1.Look for clean (non-turbulent) water

2.Mount the transducer with approximately 1/2” extending beyond the bottom of the boat.

3.Do not mount the transducer behind strakes on the bottom of the boat or in the path of a prop.

4.If you experience poor reception, try another location.

IWARNING! Speeds in excess or 20 MPH may cause the transducer to fly off and strike occupants of the boat.