Unit Operation

Setup Menu/Alarms

Contrast Adjustment

Beeper Selections

24

System

The ‘Sys’(System) tab contains the ‘Contrast’, ‘Beeper’, and ‘NMEA’ Output setups. To access the ‘System’ Setup Menu, use the arrow keys to highlight the System tab.

Contrast

The display ‘Contrast’ may need to be adjusted to compensate for light levels or viewing angles.

To Adjust the Contrast:

1.Highlight the ‘System’ tab on the Setup Menu.

2.Highlight the ‘Contrast’ Adjustment field and press ENTER.

3.Move the slider using the arrow keys, press ENTER to accept the setting.

Beeper

The ‘Beeper’ field contains three settings: ‘Off’, ‘Alarms Only’, and ‘Key & Alarm’.

To Change the Beeper Setting:

1.Highlight the ‘System’ tab on the Setup Menu.

2.Highlight the ‘Beeper’ field and press ENTER.

3.Choose ‘Off’, ‘Alarms’, or ‘Key & Alarms’, press ENTER to accept the setting.

NMEA Output

The Fishfinder 100 has the ability to output information about Depth, Speed, and Water Temp for display on another NMEA-compatible device.

To Activate/Deactivate the NMEA Output:

1.Highlight the ‘System’ tab on the Setup Menu.

2.Highlight the ‘NMEA’ Output field and press ENTER.

3.Choose ‘Off’, or ‘On’, press ENTER to accept the setting.