To change the Depth Line Setting:

1.Place the highlight over the ‘Depth Line’ selection on the Adjustment Bar.

2.Use the UP or DOWN Arrow to change the setting, press ENTER to accept the change.

Flasher

With the ‘Flasher’ tool active, a graphic Flasher representation will be displayed on the far right side of the chart. This graphic Flasher displays structure and bottom returns much the same as a true Flasher. You may find this feature particularly useful when using ‘Fish Symbols.’

To Turn the Graphic Flasher on and off:

1.Highlight the ‘Tools’ tab on the Setup Menu.

2.Highlight the ‘Flasher’ selection field and press ENTER.

3.Select ‘On’ or ‘Off’ and press ENTER to accept the selection.

Simulator

The ‘Simulator’ tool allows the unit to simulate the use of four different transducer configurations: ‘Depth Only’, ‘Temp’, ‘Speed’, or ‘Temp and Speed’. These choices allow the user to view more accurate depictions of actual unit operation. For details on using the simulator, see page 35.

Noise Reject

The ‘Noise Reject’ tool helps filter unwanted noise from the chart. The ‘Noise Reject’ tool can be turned ‘Off,’ set for ‘Auto’ (automatic) adjustment or set for ‘Manual’ adjustment.

Remember when setting the Noise Reject tool, the higher the noise rejection

setting,themorelikelytheunitistonotshowfishorstructure.

Continued on page 20

Unit Operation

Setup Menu: Tools TabDepth Line ActivatedGraphic Flasher Activated

19