Battery Voltage

When activated, the ‘Battery Voltage’ Alarm will warn you when the battery voltage reaches a user determined state of discharge.

To activate/deactivate the Battery Voltage Alarm:

1.Highlight the ‘Alarm’ tab on the Setup Menu.

2.Highlight the ‘Battery Voltage’ checkbox.

3.Pressing ENTER will insert or remove a check mark in the checkbox.

To set the Battery Voltage Alarm:

1.Highlight the ‘Battery Voltage’ field and press ENTER.

2.Use the Arrow Keys to input the desired voltage, then press ENTER to accept the setting.

System Tab

The ‘System’ tab contains the ‘Contrast,’ ‘Beeper,’ ‘NMEA Output’ and ‘Language’ setups. To access the ‘System’ tab, use the arrow keys to highlight it.

Contrast

The display ‘Contrast’ may need to be adjusted to compensate for light levels or viewing angles.

To adjust the Contrast:

1.Highlight the ‘System’ tab on the Setup Menu.

2.Highlight the ‘Contrast’ Adjustment field and press ENTER.

3.Using the Right/Left ARROW keys, move the slider Right to darken the screen, or Left to lighten the screen. When finished, press ENTER to accept the setting.

Unit Operation

Setup Menu: Alarms/System Tabs

Battery Voltage AlarmContrast Adjustment

25