Unit Operation
Setup Menu: Tools/Numbers Tabs
Noise Reject Manual Adjustment SliderNormal Numbers | Large Numbers |
20
1.Highlight the ‘Tools’ tab on the Setup Menu.
2.Highlight the ‘Noise Reject’ selection field and press ENTER.
3.Choose ‘Off,’ ‘Auto,’ or ‘Manual’ and press ENTER.
To manually adjust the Noise Reject Setting:1.Select ‘Manual’ in the ‘Noise Reject’ field of the ‘Tools’ tab, then press ENTER. A slider will appear below the ‘Noise Reject’ selection field.
2.Use the Up or Down ARROW key to highlight the slider, then press
ENTER.
3.Use the Left or Right ARROW key to manually adjust the Noise Reject to the desired setting, then press ENTER.
Numbers Tab
The ‘Numbrs’ (Numbers) tab allows you to choose whether you would like to see normal or large numbers on the chart. You can also configure the unit to display ‘Battery Voltage,’ (water) ‘Temperature,’ and ‘Speed’ Over Water if the unit is equipped with capable sensors. You can also set up how the unit finds the digital ‘Depth Number.’ To access the ‘Numbrs’ tab, place the highlight over it using the arrow keys.
Number SizeThis setting determines the size of the numbers displayed in the ‘Depth,’ ‘Temperature,’ ‘Battery Voltage’ and ‘Speed’ fields on the chart.
To select Normal or Large Numbers:1.Highlight the ‘Numbrs’ tab on the Setup Menu.
2.Highlight the ‘Number Size’ selection field and press ENTER.
3.Choose ‘Normal’ or ‘Large’ and press ENTER to accept the selection.