Unit Operation

Setup Menu: Chart/Tools Tabs

Scale — ‘Overlay’

 

Scale — ‘Corners’

 

 

 

 

 

 

Scale — ‘Basic’

Scale — ‘No Scale’

18

Scale

The depth ‘Scale’ is displayed vertically along the right side of the chart. The depth ‘Scale’ can be configured to display in four different modes: as an ‘Overlay,’ in the ‘Corners,’ as a ‘Basic’ Scale, or with ‘No Scale.’

To change the Scale Setting:

1.Highlight the ‘Chart’ tab on the Setup Menu.

2.Highlight the ‘Scale’ selection field and press ENTER.

3.Choose ‘Overlay,’ ‘Corners,’ ‘Basic’ or ‘No Scale,’ then press ENTER to accept the selection.

Tools Tab

The ‘Tools’ tab contains the ‘Depth Line,’ ‘Flasher,’ ‘Simulator’ and ‘Noise Reject’ tools. The ‘Depth Line’ tool is used to quickly identify a set depth or to measure the depth of underwater objects. The ‘Noise Reject’ and ‘Flasher’ tools are used to enhance the chart and help in identifying and providing information about an underwater return. The ‘Simulator’ tool

is used to enhance the simulator mode by allowing you to customize the simulated transducer selection. To access the ‘Tools’ tab, place the highlight over it using the arrow keys.

Depth Line

When the ‘Depth Line’ tool is activated, a Depth Line selection is added to the Adjustment Bar.

To activate the Depth Line:

1.Highlight the ‘Tools’ tab on the Setup Menu.

2.Highlight the ‘Depth Line’ selection field and press ENTER.

3.Select ‘On’ and press ENTER.