FNOTE: When the frequency is set to ‘Dual,’ the appearance ofthefishsymbolswillchange.Fishreturnsfromthecenter ofthebeamwillbeblack,butthefishreturnsfromtheedges

of the beam will be clear.

Whiteline

‘Whiteline’ controls how the unit displays information about the

bottom type (hard or soft). With the Whiteline ‘OFF’, the bottom return will display as black and contain no information on bottom hardness. With Whiteline ‘ON’, the bottom return will become gray-scaled. The degree of gray-scale can be used to determine bottom hardness. See page 33 for more details on this feature.

To change the Whiteline Setting:

1.Highlight the ‘Chart’ tab on the Setup Menu.

2.Highlight the ‘Whiteline’ selection field and press ENTER.

3.Choose ‘On’ or ‘Off’ and press ENTER to accept the selection.

Scroll Speed

You can adjust the speed that the chart scrolls from right to left by

using the ‘Scroll Speed’ selection field. If you are sitting still or the chart is moving too fast, slowing the scroll rate can be beneficial.

To adjust the Scroll Speed:

1.Highlight the ‘Chart’ tab on the Setup Menu.

2.Highlight the ‘Scroll Speed’ selection field and press ENTER.

3.Choose ‘Fast,’ ‘Medium,’ ‘Slow’ or ‘Pause,’ then press ENTER to accept the selection.

Unit Operation

Setup Menu: Chart Tab

Fish Symbols in Dual Frequency ModeWhiteline Selections

17