4.5Audio Inputs/Outputs and Mic Keys
4.5.1Mic Audio Inputs and Mic Keys
Pin | Connector |
| Pin Name | Description | I/O | |
34 | P2401 | PILOT MIC KEY* IN | Enables respective MIC audio into | IN | ||
33 | P2402 | COPILOT MIC KEY* IN | the selected transceiver unit | IN | ||
33 | P2401 | PILOT MIC AUDIO IN HI | Pilot Mic audio input and ground | IN | ||
|
|
| reference |
| ||
35 | P2401 | PILOT MIC IN LO | ||||
32 | P2402 | COPILOT MIC AUDIO IN HI | Copilot Mic audio input and ground | IN | ||
|
|
|
| reference |
| |
34 | P2402 | COPILOT MIC IN LO | ||||
| ||||||
35 | P2402 | PASS 1 | MIC AUDIO IN HI | Passenger 1 Mic audio and ground | IN | |
36 | P2402 | PASS 1 | MIC AUDIO IN LO | reference | ||
37 | P2402 | PASS 2 | MIC AUDIO IN HI | Passenger 2 Mic audio and ground | IN | |
38 | P2402 | PASS 2 | MIC AUDIO IN LO | reference |
*Denotes Active Low (Ground to activate)
4.5.2Intercom Key Inputs (if configured)
These inputs only perform the described ICS KEY function if the audio panel has been configured for KEYED ICS by configuration jumper settings (see Section 2.3.1). For this configuration, intercom squelch levels should be set fully CCW (live MIC) because the MIC signal must also break the VOX threshold to be heard.
Pin | Connector | Pin Name | Description | |
17 | P2402 | PILOT ICS KEY* IN | Enables respective mic audio to be heard | |
36 | P2401 | COPILOT ICS KEY* IN | ||
in the intercom | ||||
37 | P2401 | PASSENGER ICS KEY* IN | ||
|
*Denotes Active Low (Ground to activate)
4.5.3COM Audio and Mic Keys
Pin | Connector | Pin Name | Description | I/O |
12 | P2401 | COM 1 MIC KEY* OUT | Enables transmission on the | OUT |
30 | P2401 | COM 2 MIC KEY* OUT | respective transceiver unit | OUT |
9 | P2401 | COM 1 AUDIO IN HI | COM 1 Audio Input | IN |
11 | P2401 | COM 1 MIC AUDIO OUT HI | COM 1 Audio Output | OUT |
10 | P2401 | COM 1 AUDIO LO | Ground Reference for COM 1 | |
13 | P2401 | COM 2 AUDIO IN HI | COM 2 Audio Input | IN |
15 | P2401 | COM 2 MIC AUDIO OUT HI | COM 2 Audio Output | OUT |
14 | P2401 | COM 2 AUDIO LO | Ground Reference for COM 2 |
* Denotes Active Low (Sinks current to ground when active)
Page | GMA 240 Installation Manual |
Rev. A |