Contacts
| | Standard Density Connectors | | | | | | | | Hi Dens. Connector |
| | 37 socket connector (J1 on unit) | | 9 pin connector (on battery pack) | | | 26 pin connector (J2 on unit) |
| | 20-24 AWG socket contact | | 18 AWG socket contact | 20-24 AWG pin contact | | 18 AWG pin contact | | 22-28 AWG pin contact |
Garmin p/n | 336-00022-00 | | | 336-00023-00 | 336-00024-00 | | 336-00025-00 | 336-00021-00 | | |
| | | | | | | | | | | | | | | | | | |
military p/n | M39029/63-368 | | | n/a | | M39029/64-369 | | n/a | | | M39029/58-360 |
Amp | 205090-1 | | | n/a | | 205089-1 | | n/a | | 204370-2 | | | |
Positronic | M39029/63-368 | | | FC6018D | | M39029/64-369 | | MC6018D | | | M39029/58-360 |
| | | | | | | | | | | | |
ITTCannon | 031-1007-042 | | | see note | | 330-5291-037 | | see note | | 030-2042-000 | | |
| | | | | | | | | | | | | | | | | | |
| | | | | | | | | | | | | | | | | | |
| Tools | | | | | | | | | | | | | | | | | |
| | | Hand | Standard Density Connectors (size 20 contacts) | Hi Dens. Connector (size 22D) | | |
| | | Crimping | | | | | | | |
| | | pin or socket contacts (20-24 AWG) | pin or socket contacts (18 AWG) | pin contacts (22-28 AWG) | | |
| | | | | | | | | | | |
| | | Tool | positioner | insert/extract | positioner | insert/extract | positioner | insert/extract | | |
| military p/n | | M22520/2-01 | M22520/2-08 | | M81969/1-02 | n/a | M81969/1-02 | M22520/2-09 | M81969/1-04 | | |
| Positronic | | 9507 | 9502-5 | | M81969/1-02 | 9502-11 | M81969/1-02 | 9502-3 | M81969/1-04 | | |
| ITTCannon | 995-0001-584 | 995-0001-604 | | 980-2000-426* | see note | 274-7048-000* | 995-0001-739 | n/a | | |
| | | | | | | | | | | | | |
| Amp | | 601966-1 | 601966-5 | | 91067-2 | | n/a | n/a | 601966-6 | 91067-1 | | |
| Daniels | | AFM8 | K13-1 | | | M24308/1-02 | K774 | M24308/1-02 | K42 | M24308/18-1 | | |
| | | | | | | | | | | |
| Astro | | 615717 | 615725 | | M81969/1-02 | see note | M81969/1-02 | 615724 | M81969/1-04 | | |
* Insert/extract tools from ITT Cannon are all plastic, others are plastic with metal tip.
Non- GARMIN part numbers shown are not maintained by GARMIN and consequently are subject to change without notice.
NOTE: Alternate contacts for 18 AWG wire: As an alternate to the Positronic contacts listed (and provided in the install kit), the installer may use contacts made by ITT Cannon as follows: Socket contact - ITT Cannon p/n: 031-10007- 001, Pin contact - ITT Cannon p/n: 330-5291-055. These contacts require the use of a different crimp tool positioner than that shown in the table, with part numbers as follows: Daniels p/n: K250, Astro p/n: 616245, or ITT Cannon p/ n: 980-00005-722.
See Appendix B for information regarding obsolete stamped type contacts.
3.4RACK INSTALLATION
A. Figure 3-4 shows outline dimensions for the aviation rack. Install the rack in a rectangular 6.320" x 2.000" hole in the instrument panel. Exercise caution when installing the rack into the instrument panel. The rack is designed to facilitate removal of the GNC 300 for portable use. Deformation of the rack may make it difficult to install and remove the GNC 300.
B. Install the rack in the aircraft panel using four #6-32 countersunk screws and four self-locking nuts or other FAA approved methods as per Advisory Circular 43.13-1A. The screws are inserted from the inside through the holes in the sides of the rack (see Figure 3-5).
Av. Kit Install. Manual
190-00067-02 Rev. J
Page 14