of the rack. Figure
1.2.3.1 37 PIN CONNECTOR (J101)
CDI: | Capable of driving up to three 1000 ohm parallel |
(Pins 1 and 4) | loads, +150 millivolts full scale deflection with a |
| maximum output of +300 millivolts. |
To/From: | Capable of driving up to three 200 ohm parallel |
(Pins 2 and 4) | loads, +82 millivolts full scale deflection. |
| Units with Mod Status 1: +190 millivolts full scale deflec- |
| tion. |
Nav Flag: | Capable of driving up to three 1000 ohm parallel |
(Pins 3 and 4) | loads, 375 millivolts for flag |
| +40 millivolts for flag |
OBI data: | Output providing bearing to waypoint data for a |
(Pins 7, 8, and 23) | Bendix/King RMI (KI 229 or equivalent). |
Message annunciator: | Output capable of driving negative logic message |
(Pin 20) | annunciators by sinking up to 500mA. |
RS232 chan 1 output data: Output capable of driving devices as listed in Section 4.
(Pin 24)Conforms to the EIA specification
RS232 chan 2 output data: Output capable of driving devices as listed in Section 4.
(Pin 19)Conforms to the EIA specification
RS232 chan 1 input data: | Input capable of receiving data from devices listed in |
(Pin 17) | Section 4. Conforms to the EIA specification |
Arrival annunciator: | Output capable of driving negative logic annunciator |
(Pin 12) | by sinking up to 500mA. |
GPS approach active ann: | Output capable of driving negative logic annunciator |
(Pin 13) | by sinking up to 500mA. See GNC 300 Pilot's Guide, |
| (GPN |
GPS approach arm ann: | Output capable of driving negative logic annunciator |
(Pin 28) | by sinking up to 500mA. See GNC 300 Pilot's Guide, |
| (GPN |
ARINC 429 Output A & B: Output capable of interfacing with any device that has
(Pins 15 and 16) | an input conforming to the GAMA ARINC 429 (low |
Av. Kit Install. Manual | speed) specification. |
| |
Page 6 |
|