Note: Verify with manufacturer of data input device that unit supports GARMIN interface.
Output: Field | Description |
off | No units connected to Channel 1 output |
aviation | Serial position, velocity and navigation data to: |
| Argus, Model 3000, Moving Map |
| Argus, Model 5000, Moving Map |
| Argus, Model 7000, Moving Map |
| Stormscope, Series II with Navaid, Moving Map |
| Shadin, 91204X[T] Digital Fuel Management System |
| (TSO'd) |
| Shadin, 91053X[T] Digital Fuel Management System |
| Electronics International, Model |
| Computer |
| Shadin, Model |
| (TSO'd) |
| GARMIN, GPS 195 |
| GARMIN, GPS III |
4.2.3 |
|
Select the
Input: | Field | Description |
| off | No units connected to the |
| Collins PL2 DSP | Collins Pro Line 2 Display Select Panel connected |
Output: | Field | Description |
| off | NO AVAILABLE SELECTIONS |
4.2.4ARINC 429 CHANNEL
Select the ARINC 429 Channel Test Page. Change the selectable output to match that of the installed equipment. The available options are:
Input: Field | Description |
off | No units connected to ARINC 429 input |
Selected Course | Any ARINC 429 compatible unit that transmits the |
| “Selected Course” word (label 100) |
Course/heading | Any ARINC 429 compatible unit that transmits the |
| “Selected Course” (label 100), as well as the “True |
| heading” (label 314) and/or “Magnetic heading” (label |
| 320) words |
Heading | Any ARINC 429 compatible unit that transmits the |
| “True heading” (label 314) and/or “Magnetic heading” |
| (label 320) words |
Av. Kit Install. Manual
Page 17