4.2INSTALLATION CONFIGURATION

Note that the below pages are in the order found when rotating the outer knob clock-wise starting at the Display Test Page. See Section 4.1 to get to this page.

4.2.1 DISPLAY ADJUSTMENT

This page allows the setting of display parameters that affect the display brightness in automatic mode.

“response time” sets the speed with which the brightness responds to ambient light changes. The higher the number the slower the display responds.

“min” sets the minimum brightness of the display. The higher the number the brighter the minimum brightness.

“slope” sets the sensitivity the brightness of the display has to changes in ambient light. The higher the number the brighter the display will be for a given increase in ambient lighting.

4.2.2 I/O CHANNEL 1

Select the I/O CHANNEL 1 Test Page. Change the selectable input and output to match that of the installed equipment. The available options are:

Input:

Field

Description

 

off

No units connected to Channel 1 input

 

icarus-alt

Serial altitude received from:

 

 

Icarus, Model 3000, Mode C Serializer

 

shadin-alt

Serial altitude received from:

 

 

Shadin 9000T Serializer System (Non-TSO'd)

 

 

Shadin 9200T Series Serializer System (Non-TSO'd)

 

 

Shadin 8800T Series Encoder System (TSO'd)

 

shadin-fuel

Fuel information received from:

 

 

Shadin91204XTSeriesDigitalFuelManagementSystem

 

 

(TSO'd)

 

 

Shadin91053XTSeriesDigitalFuelManagementSystem

 

 

(TSO'd)

 

arnav/ei-fuel

Fuel information received from:

 

 

Arnav, Model FC-10, Fuel Computer (TSO'd)

 

 

Arnav, Model FT-10, Fuel Totalizer (TSO'd)

 

 

Electronics International, Model FP-5L, Fuel Flow

 

 

Computer (Non-TSO'd)

 

shadin-adc

Air data information received from:

 

 

Various models from the 9628XX-X family

 

shadin-fadc

Fuel/Air data information received from:

 

 

Various models from the 9628XX-X family

Av. Kit Install. Manual

190-00067-02 Rev. J

Page 16