Remember safe and prudent operation of the

vessel is your responsibility as Captain.

Bull’s eye

How To Turn the Autopilot on:

Press and release Deckmount (on/off) button, usually found on stern of boat close to the out board. The deckmount light and standby LED on the hand held will both blink, the autopilot system is in a start-up mode and no operations are available for 30 seconds.

STBY LED

How to engage Autopilot:

When the STBY LED turns solid press the bull’s eye and release to engage the autopilot.

AUTO LED

When the AUTO LED is solid the autopilot is engaged.

Press and hold the left straight arrow button to make a port turn, AUTO LED will start blinking, to stop turn release button, AUTO LED will revert to solid when a new heading is captured. Or momentarily press button to make a 1 degree heading change. (Momentarily pressing the button twice = 2 degree change, three times = 3 degree change, etc.)

Press and hold the right straight arrow button to make a starboard turn, AUTO LED will start blinking, to stop turn release button, AUTO LED will revert to solid when a new heading is captured. Or momentarily press button to make a 1 degree heading change. (Momentarily pressing the button twice = 2 degree change, three times = 3 degree change, etc.)

Page 2
Image 2
Garmin PN 906-2001-00 manual How To Turn the Autopilot on, How to engage Autopilot