GarrettCom Magnum ST80 manual To existing network via switchable Up-Link port, Applications

Stackable Personal Hubs Installation and User Guide (04/01)

2.4Applications

Expanding from one to multiple ports at an existing site is easy, and requires no modification to typical building wiring. Simply plug the existing networked device's network cable into one of the ST80’s front RJ-45 ports. The Up-Link port (with switch set to “X”) connects via 10BASE-T cabling to the existing network outlet. Optionally, a mini-transceiver may be connected to the rear-mounted AUI port to provide connectivity to any standard Ethernet media type. (The ST80-B and ST80-F provide for direct connection to 10BASE2 and multi-mode Fiber respectively).

Port 8 Switchable Up-Link set to “X”

		RI			PWR			AUI
		1B
	2BRI		Magnum ST80 Stackable Personal Hub
	OFFStac
O							UP-LINK
	k
NlebEna			Ports 1	2 3 4 5 6 7		8

Personal Workgroup

...to existing network via switchable Up-Link port.

Power is connected by plugging the external power supply unit into an AC power receptacle, and plugging the DC power plug into the jack on the back of the ST80. In minutes, up to eight additional ports are available for other networked devices.

...to existing network via AUI, BNC (ST80-B only), or Fiber ST (ST80-F only) connector.

1BRI 2BRI

	OFFStac
O	k
NEnable

PWR		AUI	Port 8 Switchable
Magnum ST80 Stackable Personal Hub
Ports 1 2 3 4 5 6 7	8 UP-LINK

Up-Link set to “==”

Personal Workgroup

www . GarrettCom . com

9