Operating the projector

Operating the projector

After you have connected all components to the projector, you are ready to begin using the projector.

Starting the projector

To start the projector:

1

2

3

Press the power button. The power LED displays steady green.

Turn on the connected components.

After all components are running, allow about 30 seconds for the display image to appear. If the power LED is not steady green or you do not see a display image, check the connections. For more troubleshooting information, see “Troubleshooting” on page 41.

Use the focus ring and zoom wheel to adjust the display.

You can also use the on-screen display (OSD) to make additional display setting adjustments if necessary. For more information, see “OSD options” on page 30.

 

www.gateway.com

29