Gateway 210 Remote control does not work, Display image is poor or blurred, Display image is wider on the top or bottom

Troubleshooting

Display image is wider on the top or bottom

■Press the button on the remote control to adjust the display image. For more information, see “Remote front” on page 16.

■Reposition the projector to get a better angle on the projection screen.

Display image is poor or blurred

■If the projector is connected to your computer, press the Auto button on the remote control to automatically adjust the display image to the ideal settings for the display source.

■Use the focus ring to manually focus the display image.

■Use the OSD menus to adjust the image settings. For more information, see “OSD options” on page 30.

■Reposition the projector to get a better angle on the projection screen.

Remote control does not work

■Make sure that you are less than 29.5 feet (9 meters) of the infrared remote sensors on the front and back of the projector.

■Make sure that nothing is blocking the infrared remote sensors on the top of the projector.

■Replace the batteries in the remote control. For information on replacing the batteries, see “Remote control” on page 15.

www.gateway.com 43